Last
update:
2019/04/04
11:08
torpedo_cab_m:torpedo_c.a.b._m_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_cab_m:torpedo_c.a.b._m_user_s_manual
https://wiki.two-notes.com/ Printed on 2019/04/04 16:57
pressing on the right (ENTER) encoder makes you go into the selected section or toggle the
selected parameter
All starts with the first section, which allows you to chose which mode you will be working in : Arcade,
Simulation or IR Loader.
To enter any section and edit the related parameters, scroll to the relevant section by turning the
PARAM encoder and press ENTER to enter. Some sections can be modified directly without entering it,
by turning the VALUE encoder. For most of them, this means turning it ON or OFF (the image will then
appear in negative mode).
Depending of the mode, the editable sections change. We will go through the sections for each mode.
4.3.1 Arcade mode
In the simplified interface of the Arcade mode, each parameter actually controls one or several
parameters of the device.
The interface of the Arcade mode has 3 specific sections, detailled hereunder.
1. Instrument Type
2. Gear
3. Settings (tone)
To Next Page
Loading...
General