Last
update:
2017/10/26
15:26
torpedo_captor:torpedo_captor_user_s_manual http://wiki.two-notes.com/doku.php?id=torpedo_captor:torpedo_captor_user_s_manual
http://wiki.two-notes.com/ Printed on 2017/10/27 04:35
6.5 Reactive loadbox
Input impedance: 4, 8 or 16 Ohms
Admissible power: 100W RMS (see this article if your amplifier is more powerful)
Fan powered by the amp: the phantom or external power supply is not needed.
Thermal security: the amp and musician work in security.
6.6 Input / Output
Speaker Input: 1/4″ Jack unbalanced (TS, Tip/Sleeve)
Speaker Att: 1/4″ Jack unbalanced (TS) – Attenuation: -20dB
Speaker Thru: 1/4″ Jack unbalanced (TS) – Directly connected to Speaker Input. The loadbox is
disconnected when a jack is inserted in this Thru output
Line Output: 1/4″ Jack balanced (TRS) – Impedance: approx 1 kOhms – Without speaker simulation
DI Output: XLR balanced – Impedance: 600 Ohms – With or without speaker simulation
6.7 Speaker sim
Guitar or Bass, analog, based on acclaimed Torpedo virtual cabinets
6.8 Power
Power is required only for the XLR DI output and speaker simulation.
Phantom power or DC jack, 2.1×5.5mm, negative center.
Current : 5mA
6.9 Dimensions & weight
175 x 126 x 62 mm
1 kg
7 Technical support
Should you encounter a problem with your product or need help regarding any technical aspects,
please note that Two notes Audio Engineering has developed on-line services to provide you with fast
and efficient technical support, the Two notes Help Desk.
To Next Page
Loading...
Need help?
General
