Two Notes TORPEDO Live - Page 23

Configuring and using the TORPEDO Live
Parameter
Value
MIDI CC
Control Change receive, On or Off
MIDI PC
Program Change receive, On or Off
MIDI CHANNEL
MIDI Channel selection, from 1 to 16 or ALL (the machine listens to all
MIDI channels)
MIDI MONITOR
Incoming MIDI command monitoring
• "- -": a command is received on a MIDI channel different from the
one you selected for the machine.
• "In": a command is received on the channel you selected for the
machine.
REMOTE MONITOR
• No Connection: no active USB connection
• USB Connected: active USB connection
• Remote connected: active USB connection, sync with the TOR-
PEDO remote
SPDIF Freq
Selection of the S/PDIF output frequency (48KHz or 96KHz)
Firmware
Current firmware version of the TORPEDO Live
Serial
Serial number
Two Notes Audio Engineering TORPEDO Live 23