Using Torpedo Wall of Sound
2 Routing of Torpedo Wall of Sound : stereo and mono to stereo track
Torpedo Wall of Sound is designed to work with stereo / dual mono signals, so you can insert it on a
stereo track or a stereo bus. With Torpedo Wall of Sound you can handle as many as 100 different
cabinets and microphones simultaneously. The 100 cabinets are displayed on 50 channels. In other
words, one channel contains two cabinet-miking configurations. Each channel offers independent
controls for pan and volume.
Figure 6.1: On a stereo track
With certain software sequencers such as Logic Audio™, you will be able to load the plug-in as a
mono to stereo plug-in. That way, the mono input channel is sent to the plug-in’s two channels:
Figure 6.2: On a mono to stereo track
32 Two Notes Audio Engineering Torpedo Reload
To Next Page
Loading...