Two Notes Torpedo Captor User Manual

2017/10/27 04:35 1/21 Torpedo Captor User's Manual
User's manuals - http://wiki.two-notes.com/
Torpedo Captor User's Manual
The compact loadbox and amp DI
The complete electronic version of this manual, as well as the Two notes Audio Engineering software
and hardware products, are subject to updates. You can download the most recent versions of the
products on the Two notes Audio Engineering website.
This manual describes the Torpedo Captor and provides instructions for its operation. It is highly
recommended that you read this document before using the product. The contents of this manual
have been thoroughly verified and it is believed, unless stated otherwise, to accurately describe the
product at the time of shipment from the factory or download from our website.
Two notes Audio Engineering is a registered trademark of:
OROSYS SAS
76 rue de la Mine
34980 Saint-Gély-du-Fesc
France
Tel: +33 (0)484 250 910
Fax: +33 (0)467 595 703
Contact and support: http://support.two-notes.com
Website: http://www.two-notes.com
This document is the exclusive property of OROSYS SAS. In the interest of product development,

Two Notes Torpedo Captor Specifications

General

Power Handling	100W RMS
Impedance Options	4, 8, 16 Ohms
Cabinet Simulation	Yes
Speaker Simulation	Yes
USB	No
Speaker Emulation	Yes
USB Connectivity	No
Outputs	Line Output
Digital Outputs	USB
Power Source	External Power Supply

Summary

1 Foreword

1.1 Safety instructions

Essential safety guidelines and warnings for product operation, including electrical risks and safe handling.

1.5 Warranty

2 Recommendation on the proper use of a loadbox with a tube amplifier

2.1 What is a loadbox?

Explains the function and importance of a loadbox for tube amplifiers, including impedance.

2.2 Which output volume for my amplifier?

Advises on safe and optimal volume settings for tube amplifiers when using a loadbox.

3 About the Torpedo Captor

3.2 The Torpedo Captor's advanced functions

Details the product's key features like reactive loadbox, attenuator, DI, and speaker simulation.

3.3 The Torpedo technology and Torpedo Wall of Sound plugin

Explains the underlying technology and the included software plugin for sound processing.

4 Using the Torpedo Captor

4.2 Front and rear panel

Identifies and describes the physical controls and connectors on the front and rear panels.

4.3.1 Loadbox

4.3.2 Thru output

4.3.3 Power attenuation

4.3.4 Line output

4.3.5 DI output

4.3.6 Speaker simulation

5 Setting up the Torpedo Captor

5.1 On stage with a regular speaker cabinet

Guides setting up the Captor for live use with a speaker cabinet connected to the Thru output.

5.2 On a silent stage

Details silent stage setup using the Captor's internal loadbox for direct DI output.

5.3 In the studio

Explains studio setup using the Captor's dry signal and Wall of Sound plugin for virtual miking.

5.4 Impedance selection guide

6 Specifications

6.5 Reactive loadbox

6.6 Input / Output

6.7 Speaker sim

6.8 Power

7 Technical support