Specifications
2.5 Technical data
Designation
Characteristics
Speaker Input
Jack 6.35mm (1/4") unbalanced (TS, Tip/Sleeve)
Maximum input voltage: 140 Volts AC (45 dBu)
Security load: 220 Ohms / 10 Watts
Loadbox
Reactive load, nominal impedance: 4 or 8 or 16 Ohms switchable
Maximum continuous admissible power: 150 W (assuming proper ventilation)
Maximum temporary admissible power : 200 W (assuming proper ventilation)
Speaker Output
2 X Jack 6.35 mm (1/4") unbalanced (TS)
Minimal load: 4 Ohms
Maximum output level:
• 29 dBu @ 16 Ohms
• 28.5 dBu @ 8 Ohms
• 27 dBu @ 4 Ohms
Maximum output power:
• 25 W RMS@ 16 Ohms
• 50 W RMS@ 8 Ohms
• 70 W RMS@ 4 Ohms
Loadbox Output
Balanced male XLR
Output Impedance: 600 Ohms
Ground/Lift switch
Attenuation (speaker input to balanced loadbox output): 24.5 dB
Maximum output level (balanced): 20.5 dBu
Noise: under -98 dBu from 20 Hz to 20 kHz
Frequency response @ -1dB: 5 Hz to 24 kHz
Two Notes Audio Engineering Torpedo Reload 47
To Next Page
Loading...