TWO TREES TTC450 - Axis Installation and Alignment

8
Step 3
-Left Y-axis assembly*1
-Right Y-axis assembly*1
-M5X30 screws*8
-M5X20*2
-3.0 hexagonal wrench
Required parts
Lock in the front left and right Y-axis
assembly with M5*30 screws first
M5* 20 screws to lock both
sides of the back of the machine
Note: All M5X30 screws are screwed
into the holes and then locked.
Y-axis installation
TTC450
Set up TTC450