TYAN Tempest i5000XT S2696

To Next Page

Tempest i5000XT

///

S2696

Version 1.30

this manual may be reproduced or translated without prior written consent from

TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Tempest i5000XT are trademarks of TYAN Computer Corporation.

Intel, Greencreek, and combinations thereof are trademarks of Intel Corporation.

Phoenix, Phoenix-Award BIOS are trademarks of Phoenix Technologies.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

Need help?

Do you have a question about the TYAN Tempest i5000XT S2696 and is the answer not in the manual?

Summary

Chapter 1: Introduction

1.1 Congratulations

Welcome message about purchasing the motherboard.

1.2 Hardware Specifications

Details of the motherboard's technical specifications.

Chapter 2: Board Installation

Safe Motherboard Installation Practices

Precautions for installing the motherboard safely and correctly.

2.1 Board Image

Visual representation of the motherboard layout.

2.2 Block Diagram

Diagram showing the interconnection of motherboard components.

2.3 Board Parts, Jumpers and Connectors

Identification and location of motherboard components, jumpers, and connectors.

2.4 Motherboard Installation Tips

Guidance on securing the motherboard within the computer chassis.

2.5 Installing the Processors

Step-by-step instructions for installing CPU(s) into the socket.

2.6 Memory Installation

Procedures and guidelines for installing DDR2 FB-DIMM memory modules.

2.7 Attaching Drive Cables

Instructions for connecting IDE and SATA drive cables.

2.8 Installing Add-In Cards

Guidance on installing expansion cards into PCI/PCI-X/PCI-E slots.

2.9 Connecting External Devices

Details of rear port connections and LAN LED status.

2.10 Installing the Power Supply

Information on connecting ATX power supply connectors to the motherboard.

2.11 Finishing Up

Final checks and advice after hardware installation.

Chapter 3: BIOS Setup

3.1 About the BIOS

Introduction to the BIOS and its purpose in system configuration.

3.2 BIOS Main Menu

Overview of the main BIOS setup screen and basic settings.

3.2.1 IDE Channel 0;1 Setup

Configuration options for IDE channels and detected disk drives.

3.2.2 Memory Cache

Settings for optimizing system performance through cache configuration.

3.2.3 Board Information

Displays system and BIOS version details.

3.3 Advanced Menu

Facilitates configuring advanced BIOS options for your system.

3.3.1 Hardware Monitoring

Displays system parameters like fan speed, temperature, and voltage.

3.3.2 BIOS Event Logging

Manages logging of BIOS events and errors.

3.3.3 Advanced Chipset Control

Advanced settings for the chipset, including memory and PCI configuration.

3.3.4 Advanced Processor Options

Fine-tuning options for processor performance and features.

3.3.5 Diskette Controller

Configuration for detecting and controlling the floppy disk drive.

3.3.6 ATA Controller

Settings for Parallel ATA and Serial ATA controllers, including RAID.

3.3.7 LSI SAS Interface

Configuration for the LSI SAS controller and option ROM scan.

3.3.8 Integrated Network Interface

Settings for onboard LAN controllers and option ROM scan.

3.3.9 Integrated Audio

Configuration for the onboard audio controller.

3.3.10 Integrated 1394

Settings to enable or disable the integrated 1394 controller.

3.3.11 Integrated USB

Configuration settings for integrated USB ports.

3.3.10 I;O Device Configuration

Configuration of serial, parallel, and DMA channel settings.

3.3.11 PCI Configuration

Setup menus for configuring specific PCI devices and slots.

3.4 Security Menu

Options for system security, including passwords and disk protection.

3.5 Power Menu

Settings related to ACPI power management and after-power-failure behavior.

3.6 Boot Menu

Configuration options for system boot devices and boot process.

3.7 Exit Menu

Options for exiting the BIOS setup, saving or discarding changes.

Chapter 4: Diagnostics

4.1 Beep Codes

Explains audible beep codes indicating system errors during boot.

4.2 Flash Utility

Information on using the BIOS flash utility for updates.

4.3 BIOS Post Code

Table of POST codes and their corresponding descriptions/beeps.

Appendix I: SMDC Information

Overview

Introduction to Tyan Server Management Daughter Card (SMDC).

Appendix II: Driver Diskette Creation

Creating a Driver Diskette

Step-by-step guide to creating a driver diskette from the TYAN CD.

Technical Support and Service

Help Resources

Lists resources for obtaining technical assistance and troubleshooting.

Returning Merchandise for Service

Procedures for returning products for warranty service.