TYAN S2723 - User Manual

1
http://www.TYAN.com
Tiger i7501
///
S2723
Revision 1.00
Copyright © TYAN Computer Corporation, 2002-2003. All rights reserved. No part of this manual
may be reproduced or translated without prior written consent from TYAN Computer Corp.
All registered and unregistered trademarks and company names contained in this manual are
property of their respective owners including, but not limited to the following.
TYAN, Tiger i7501 S2723 are trademarks of TYAN Computer Corporation.
Intel, Xeon, and combinations thereof are trademarks of Intel Corporation.
AMI, AMIBIOS are trademarks of AMI Software Incorporated.
Microsoft, Windows are trademarks of Microsoft Corporation.
QLogic, Zircon, and combinations thereof are trademarks of QLogic Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.
Winbond is a trademark of Winbond Electronics Corporation.
Portable Document Format (PDF) is a trademark of Adobe Corporation.
Information contained in this document is furnished by TYAN Computer Corporation and has been
reviewed for accuracy and reliability prior to printing. TYAN assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to sale and/or use of TYAN products including
liability or warranties relating to fitness for a particular purpose or merchantability. TYAN retains the
right to make changes to product descriptions and/or specifications at any time, without notice. In
no event will TYAN be held liable for any direct or indirect, incidental or consequential damage,
loss of use, loss of data or other malady resulting from errors or inaccuracies of information
contained in this document.

Summary

Chapter 1: Introduction

1.2 - Hardware Specifications

Details about processors, chipset, memory, expansion slots, and integrated controllers.

Chapter 2: Board Installation

2.4 - Jumper Settings

Details the function and reference page for each jumper on the motherboard.

2.8 - PCI Setup

Describes the PCI-X and PCI slots, including voltage and card compatibility.

2.9 - Mounting the Motherboard

Provides guidance on installing the motherboard into a chassis using support studs.

2.10-Installing the Memory

Shows diagrams of different RAM module types compatible with the board.

Memory Pair Installation

Details the procedure for installing memory modules in pairs for optimal system performance.

2.11 - Installing the Processor and Heatsink

Details how to install processors into ZIF sockets and general heatsink installation advice.

2.13 - Attaching Drive Cables

Explains how to connect IDE drive cables to the motherboard for primary and secondary channels.

2.16-Installing the Power Supply

Illustrates the EPS12V and ATX12V power connector configurations for the motherboard.

Chapter 3: BIOS Setup

3.12 - CPU Configuration

Settings for CPU ratio, actual value, and Hyper-Threading enablement.

3.17 - Boot

In Case of Problems

Provides advice for troubleshooting BIOS setup issues and system instability.

3.5 - Boot Settings Configuration

3.13 - ICH3 Chipset Configuration

3.3 - IDE Configuration

3.16 - ACPI Advanced

3.9 - Hardware Monitor

Chapter 4: Diagnostics

4.1 - Hardware Monitor Information

4.2 Beep Codes

Lists AMIBIOS beep codes and troubleshooting actions for system errors.

4.3 Flash Utility

Technical Support

TYAN S2723 Specifications

General

Brand	TYAN
Model	S2723
Category	Motherboard
Language	English