TFP1326
Page 20 of 22
Notes:
1. Americas Valve Trim: Pressure switches and/or solenoid valves are separately ordered.
2. EMEA Valve Trim: Pressure switches, solenoid valves, and water pressure gauges are separately ordered. NPT to ISO threaded adaptors are
provided for External Trim Connections (drains, pressure switches, water motor alarms, etc.).
3. APAC Valve Trim: Pressure switches and/or solenoid valves are separately ordered.
REGIONS OF TYPICAL AVAILABILITY (indicated by “✔”)
AMERICAS
✔ ✔ ✔ ✔
— — —
EMEA
✔ ✔ ✔ ✔ ✔ ✔ ✔
APAC
✔ ✔ ✔ ✔ ✔ ✔ ✔
Valve Size
Nominal Groove
O.D.
G x G F X F ANSI F x G ANSI T x T NPT F x F ISO F x G ISO T x T ISO
3 in. (DN80) 3.500 in. (88,9mm) 530010030 530020030 530030030 — 530040030 530050030 —
4 in. (DN100) 4.500 in. (114,3 mm) 530010040 530020040 530030040 — 530040040 530050040 —
6 in. (DN150) 6.625 in. (168,3mm) 530010060 530020060 530030060 — 530040060 530050060 —
8 in. (DN200) 8.625 in. (219,1 mm) 530010080 530020080 530030080 — 530040080 530050080 —
Notes:
1. Valves are typically provided with ange drilling per ANSI B16.1 (Class 125) or ISO (7005-2 PN16).
2. Upon request, valves can be provided with ange drilling per JIS B 2210 or AS 2129. In which case part numbers are not assigned.
Valve Sizes Americas Galvanized Americas Black
3 in. (DN80) 540000530 542000530
4 in. (DN100) 540000540 542000540
6 in. (DN150) 540000560 542000560
8 in. (DN200) 540000580 542000580
Valve Sizes EMEA Galvanized EMEA Black
3 in. (DN80) 540100530 542100530
4 in. (DN100) 540100540 542100540
6 in. (DN150) 540100560 542100560
8 in. (DN200) 540100580 542100580
Valve Sizes APAC Galvanized APAC Black
3 in. (DN80) 540000530 542000530
4 in. (DN100) 540000540 542000540
6 in. (DN150) 540000560 542000560
8 in. (DN200) 540000580 542000580
TABLE F
DV-5a VALVES PART NUMBER SELECTION
TABLE G
DV-5a VALVE TRIM
REMOTE-RESETTING, PRESSURE-REDUCING DELUGE SYSTEM
— PART NUMBER SELECTION —
To Next Page
Loading...
