To Next PageTo Next Page
Need help?Do you have a question about the Tyco DV-5 and is the answer not in the manual?
General| Brand | Tyco |
|---|---|
| Model | DV-5 |
| Category | Control Unit |
| Language | English |
Overview of the DV-5 Deluge Valve, its diaphragm design, and corrosion resistance.
Table of flange drilling dimensions for ANSI, ISO, JIS, and AS standards.
Details VdS/LPCB approvals, operating pressures, and take-out dimensions.
Information on pressure loss characteristics and patent details for the valve.
Lists materials used for body, cover, diaphragm, and fasteners, including Rilsan coating.
Explains how diaphragm chamber pressure controls valve operation during fire events.
Illustrations and descriptions of the valve's set and operated states.
Chart detailing port sizes for diaphragm chamber supply and other connections.
Graph showing nominal pressure drop in bar versus flow rate in LPM for different valve sizes.
Describes the wet pilot detection system, connections, and required components.
Diagram and parts list for the DN40/DN50 Wet Pilot Actuation Trim.
Diagram and parts list for the DN80 Wet Pilot Actuation Trim.
Diagram and parts list for the DN100/DN150 Wet Pilot Actuation Trim.
Diagram and parts list for the DN200 Wet Pilot Actuation Trim.
Details the dry pilot system, air/nitrogen pressure, and alarm switch settings.
Diagram and parts list for the DN40/DN50 Dry Pilot Actuation Trim.
Diagram and parts list for the DN80 Dry Pilot Actuation Trim.
Diagram and parts list for the DN100/DN150 Dry Pilot Actuation Trim.
Diagram and parts list for the DN200 Dry Pilot Actuation Trim.
Covers electric detection systems, solenoid valve specifications, and automatic shut-off valve.
Diagram and parts list for the DN40/DN50 Electric Actuation Trim.
Diagram and parts list for the DN80 Electric Actuation Trim.
Diagram and parts list for the DN100/DN150 Electric Actuation Trim.
Diagram and parts list for the DN200 Electric Actuation Trim.
Graph correlating water supply pressure to maximum pilot line height for dry pilot systems.
Table relating water supply pressure to maximum pilot line height for wet pilot systems.
Covers cleaning, trim installation, flow direction, drain disposal, and connections.
Includes pressure relief valve adjustment, electrical connections, and hydrostatic test preparation.
Detailed steps for setting the DV-5 Deluge Valve for service.
Procedures for resetting Manual, Wet Pilot, and Dry Pilot actuation systems.
Covers inspection frequency, owner responsibility, and general care.
Guidance on responding to low water supply pressure conditions.
Procedures for inspecting internal valve components and replacing parts.
Tests for dry pilot actuator operation, pressure settings, and condensate drainage.
Verifies solenoid valve operation and diaphragm chamber pressure response.
Details warranty period, coverage, exclusions, and liability limitations.
Provides critical installation dimensions for various valve sizes and trims.
Guide to selecting the correct deluge valve and European conformity trim.
Lists available accessories such as supervisory switches and water motor alarms.
