Limited
Warranty
Products manufactured by Tyco Fire &
Building Products (TFBP) are warrant-
ed solely to the original Buyer for ten
(10) years against defects in material
and workmanship when paid for and
properly installed and maintained un-
der normal use and service. This war-
ranty will expire ten (10) years from
date of shipment by TFBP. No war-
ranty is given for products or compo-
nents manufactured by companies not
affiliated by ownership with TFBP or
for products and components which
have been subject to misuse, improper
installation, corrosion, or which have
not been installed, maintained, modi-
fied or repaired in accordance with the
standards recognized by the Approv-
al agency, as well as the standards of
any other Authorities Having Jurisdic-
tion. Materials found by TFBP to be
defective shall be either repaired or
replaced, at TFBP’s sole option. TFBP
neither assumes, nor authorizes any
person to assume for it, any other ob-
ligation in connection with the sale of
products or parts of products. TFBP
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete information supplied by
Buyer or Buyer’s representatives.
In no event shall TFBP be liable, in
contract, tort, strict liability or under
any other legal theory, for incidental,
indirect, special or consequential dam-
ages, including but not limited to labor
charges, regardless of whether TFBP
was informed about the possibility of
such damages, and in no event shall
TFBP’s liability exceed an amount
equal to the sales price.
The foregoing warranty is made in lieu
of any and all other warranties, ex-
press or implied, including warranties
of merchantability and fitness for a
particular purpose.
This limited warranty sets forth the ex-
clusive remedy for claims based on
failure of or defect in products, materi-
als or components, whether the claim
is made in contract, tort, strict liability
or any other legal theory.
This warranty will apply to the full ex-
tent permitted by law. The invalidity,
in whole or part, of any portion of this
warranty will not affect the remainder.
FRONT VIEW RIGHT VIEW
Dimensions in mm
CHAMBER SUPPLY
CONNECTING TRIM
(FIELD FABRICATED)
STOP
VALVE
DN15 DIAPHRAGM
A
310
340
B
400
400
C
450
550
D
270
E
310
280
G
610
650
Size
Valve
DN100
DN150
F
460
500
330
DN40
360
400 550 290 700DN200 610
370
A
C
B
F
G
D E
1 1,2
1,3
1
1,3
1,2
1
NOTES:
Minimum clearance.
2
Dimension applies to
Wet Pilot and Electric
3
Dimension applies to
Dry Pilot Actuation
Actuation trims only.
trim only.
4
Dimension applies to
all trims.
4
315
400
230
220 580DN80
400 200 210
530
DN50
370340
550
550
430
400 200 210
530370340
550
FIGURE 19
DN40 thru DN200 MODEL DV-5 DELUGE VALVE
— INSTALLATION DIMENSIONS —
Page 26 of 28 TFP1338
To Next Page
Loading...
