Tyco DSC TL280 - System Reset Defaults

33
Ethernet Alarm Communicator Installation Manual
[988] DNS 1 IP Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[989] DNS 2 IP Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[990] Boot Loader Version
|____|____|____|____|____|____|____|____|
[991] Firmware Version
|____|____|____|____|____|____|____|____|
[992] Ethernet IP Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[993] Ethernet Gateway Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[998] MAC Address
| ____|____|____|____|____|____| |____|____|____|____|____|____|
System Reset Defaults
[999] Software Default
Default (99); Valid entries are 00 or 55
|____|____|
firealarmresources.com