Tyco DSC WT4911 User Manual

English, Français, Español
Português, Italiano, Nederlands
Svenska, Norsk, Dansk, Česky
Polski, Suomi, ₼㠖 , Deutsch
WT4911 / WT8911 v1.1
Installation Instructions, Instructions d’installation, Instrucciones de instalación, Instruções de Instalação, Istruzioni di
installazione, Installatiehandleiding, Installationsguide, Installasjonsinstruksjoner, Installationsvejledning,
Pokyny k instalaci, Instrukcja instalacji, Asennusohjeet, ⸘孔㖖◦ , Installationsanleitung
DG009211
NOTE: The siren is listed for UL/ULC Residential Burglary applications and it is intended to annunciate only burglary alarm tones. The
siren will sound a dual frequency sweeping tone for burglary alarms. Carbon Monoxide and Fire signal annunciation use have not been
evaluated by UL/ULC. The LED strobe light is not intended for Hearing Impaired signaling.

Tyco DSC WT4911 Specifications

General

Frequency	433 MHz
Tamper Protection	Yes
Supervision	Yes
Battery	3V Lithium Battery (e.g., CR123A)
Battery Life	3-5 years
Compatibility	DSC PowerSeries and Qolsys IQ Panel
Detection Range	Up to 200 feet (61 meters) in open air

Summary

Product Specifications and Overview

General Specifications

Details product specifications including operating temperature, frequency, battery life, and dimensions.

Powering Up the WT4911 Siren

Depassivation Process

Procedure to prepare the battery for first-time use by removing the passivation layer.

Restart Depassivation Sequence

Instructions on how to restart the depassivation process if it stops prematurely.

Wireless Siren Enrollment

Quick Enrollment Method

Enrolling the siren using the keypad and the device's electronic serial number.

Serial Number Programming

Enrollment by directly entering the siren's serial number via the keypad.

Installation Procedures

Placement Test

Testing siren signal strength at the desired mounting location for proper communication.

Physical Mounting

Instructions for opening the siren, positioning the backplate, and securing the cover.

Maintenance and Configuration

Battery Replacement and Testing

Procedure for testing battery status and safely replacing it with a trained service person.

Siren Programming Options

Configuring siren behavior, strobe activation, and tamper alerts via programming sections.

Maximum Siren Activation Time

Setting the maximum duration for siren activation, including UL/ULC specific limits.

Regulatory Compliance

FCC Compliance Statement

Information regarding FCC rules and conditions for operation to avoid interference.

Industry Canada Compliance

Details on Industry Canada technical specifications and compliance with NMB-003.

European Directive Compliance

Declaration of conformity with essential requirements of Directive 1999/5/EC.