Tyco FlameVision FV300 SERIES - System Design Information

SYSTEM DESIGN INFORMATION
10
4. SYSTEM DESIGN INFORMATION
The electrical, mechanical, environmental characteristics and the performance of the FV300
FlameVision series detectors must be taken into account when designing a system which uses these
detectors. This information is given in this section, together with guidance on detector siting. Fig.
6 shows the interfaces available on the detectors.
FIRE RELAY FAULT RELAY 4 - 20 mA OUTPUT
NETWORK INTERFACE
}
TO MONITORING SYSTEM
VIDEO (BALANCED PAIR)
TO CCTV SYSTEM
POWER (18 - 30V dc)
WALK TEST TOOL
ACTIVATE: ALARM TEST RESET WINDOW TEST
WALK TEST INPUT
IR
}
REMOTE INDICATOR
(OPTION)
CONFIGURATION/DIAGNOSTICS PORT*
TO PC
* IT IS RECOMMENDED TO PROVIDE CABLES FOR THIS PORT TO ENABLE REMOTE CONFIGURATION AND DIAGNOSTICS
Fig. 6 FV300 Interfaces
www.acornfiresecurity.com
www.acornfiresecurity.com