Tyco FlameVision FV300 SERIES User Manual

PAGE
INTRODUCION 1
PRINCIPLES OF OPERATION 3
APPLICATION 7
SYSTEM DESIGN INFORMATION 10
OPERATION 29
INSTALLATION 34
COMMISSIONING 43
MAINTENANCE 52
ORDERING INFORMATION 54
ANNEX A - MODBUS OVERVIEW 55
ANNEX B - CCTV DETAILS
59
www.acornfiresecurity.com
www.acornfiresecurity.com

Tyco FlameVision FV300 SERIES Specifications

General

Brand	Tyco
Model	FlameVision FV300 SERIES
Category	Security Sensors
Language	English

Summary

Introduction

Principles of Operation

Flame Detection Technology

Explains the IR array and DSP for reliable flame detection and location.

False Alarm and Interference Immunity

Details methods to reject non-flame sources like sunlight and blackbody radiation.

Detection Capabilities

System Design Information

Detector Interfaces and Electrical Specs

Communication and Video Options

Physical and Environmental Characteristics

Performance Standards and Certifications

Fire Detection Performance Data

System Design Guidelines and Detector Siting

Certifications and Approvals

Operation

Installation

Mounting, Positioning, and Orientation

Guidelines for physically installing the detector securely and correctly.

Wiring, Cable Entry, and Sealing

Details on recommended cables, wiring methods, and preventing moisture ingress.

Initial Wiring Checks

Procedures for continuity and insulation tests before powering up.

Commissioning

System Checks and DIP Switch Configuration

Verifying installation and setting primary detector options via DIP switches.

Advanced Configuration and Terminal Connections

Utilizing PC tools for advanced settings and understanding terminal board layouts.

Detector Assembly and Power-Up

Steps for physically assembling the detector and initial power application.

Functional and Fire Testing

Performing essential tests to verify detector operation and system coverage.

Maintenance

Routine Inspection and Cleaning Procedures

Fault Diagnosis and Walk-Test Tool Usage

Annex A - Modbus Overview