ANNEX B - CCTV DETAILS
64
Message
Field
Description
SETTLE
“SETTLE” is displayed in this field whilst the detector is settling after power up. Once
the detector has settled this field will be blank.
SERVICE
STATE
“OUT OF SERVICE” is displayed in this field when the detector is in service mode for
configuration or diagnostics. In normal operation this field is blank.
CAMERA
STATE
The following messages will be displayed on a blue background as the camera signal
is not available:
CAMERA LOST - The camera signal has been lost.
CAMERA OFF: TOO HOT - The camera temperature is too hot and it has been turned
off.
CAMERA OFF: TOO COLD - The camera temperature is too cold and it has been
turned off.
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...