MZX125/250 Fire Detection Systems
Doc. version 1 9
Constant fault monitoring of all hardware components, power
supplies, batteries, relays, sounder and speaker circuits,
addressable loops, detectors and addressable devices, monitored
input circuits, remote and local communication links.
Communication with up to 125 addresses on one detection loop
(MZX125) or 250 addresses on one detection loops (MZX250) per
controller and a combination of up to 1500 auxiliary I/O, controller
plus 7 full function repeaters and multiple remote printers.
Signalling, supervision, status and fault indication of central station
alarm signalling equipment such as BT Redcare STU.
Option for one repeater to be provided from a remote PC computer
using MX-Remote service and diagnostics software over the public
switched telephone network (PSTN).
Default cause and effect providing computer control of all outputs,
sounders, beacons and speakers in the event of alarm conditions.
Powerful programmable cause and effect using the flexible and
easily configured MINERVA group based event/action
programming language.
Synchronisation and multiple output pulse patterns for phased
evacuation of up to 16 zones (MZX125) or 32 zones (MZX250)
using “Bell Mapping”.
Powerful programmable cause and effect using the flexible and
easily configured MINERVA group based event/action
programming language.
To Next Page
Loading...
