Tyco NEKA Series - Parts Identification

2 Outdoor Self-Powered Siren
Description
The NEKA range provides the following models:
 NEKA, self-powered horn with flash;
 NEKA-F, self-powered horn with flash and foam tamper device;
 NEKA-FS, self-powered horn with strobe and foam tamper device.
This manual provided installation instructions for all NEKA sirens. Information relating to a specific model is denoted by the ap-
plicable model number within the text. The term “siren” is used to describe functionality that is applicable to all series.
This siren is a self-powered microprocessor controlled horn strobe/flash, especially designed to provide differentiated audible and
visual alarm signals.
The distinctive low profile shape is acoustically very efficient and ensures uniform sound distribution.
Robust construction and state-of-the-art technology greatly extend application flexibility, whilst microprocessor supervision of the
battery charge (NEKA and NEKA-F only), horn and flash ensure maximum performance and reliability.
Parts
1
Screws (2) for innerplate fixing.
12
Cable entry.
2
Screws (2) for cover fixing.
13
Strobe board (NEKA-FS only).
3
Battery connector.
14
Flash bulb (NEKA and NEKA-F only).
4
Connector for strobe board or flash bulb.
15
Tamper device.
5
Connector for foam tamper device.
16
Hole for wall-tamper plate fixing.
6
Jumpers for operating mode setup.
17
Loudspeaker.
7
Jumpers for tamper mode setup.
18
Foam tamper device (NEKA-F and NEKA-FS
only).
8
Connector for tamper device switch.
19
Battery location.
9
Terminal board.
20
Battery connection cable.
10
Electronic board.
21
Hole for siren temporary hanging.
11
Backplate anchor screw locations (4).
Table 1 – Parts.