Tyco Vigilant MX1-Au - Page 8

r
-~--------------------------------~-~-------------------------------------,
i--:--~
AR
+
-~--------------------------------~
MX1
-~-------.
AL
+~-------+------~
48-C
+
NOTES:
1. USE ONLY 850XX DETECTORS.
2. PROVIDES MX LOOP SHORT CIRCUIT ISOLATION.
3. MAX IB UNITS BElWEEN ISOLATORS = 1 00 IB UNITS.
4. FOR PA1 011 MX1 CONTROLLER AND REV 1-2 MX1 LOOP CARDS FIT LIM800 OR
MX DEVICE WITH INTEGRAL SCI AT MX1 AL+/AL- AND AR+/AR- TERMINALS INSIDE
THE MX1 CABINET OR AN IMMEDIATELY ADJACENT BOX. NOT REQUIRED FOR
PA 1 081 OR REV 3 ONWARDS LOOP CARDS.
5. NO MORE THAN 40 DEVICES {MX DETECTORS/MODULES + ACTUATING DEVICES ON
CIM/DIM/MIM/MIO INPUTS AND EACH SEPARATE OUTPUT FUNCTION ON MIO AND
EACH SNM AND RIM MODULE) BElWEEN ISOLATORS. 850 DETECTORS IN 48-C AND
MX DETECTORS IN ISOLATOR BASES ARE ISOLATORS.
FIRE
ALARM
0
IN CONCEALED
SPACE
TYCO E500MK2
t<t.MU 1 t. INDICATOR
CONFIDENTIAL· THIS DOCUMENT MUST NOT BE COPIED NOR THE CONTENTS PASSED
• ON TO IWY THIRD PARTY WITHOUT THE CONSENT OF THE COMPIWY.
UNLESS OTHERWISE STArED
ALL DIMENSIONS IN MIWMETRES. DO NOT SC.II..E. TOLERANCES ARE TO BE:
: 1 DECIMAL PLACE ±0.5, 2 DECIMAL PLACES ±0.3, 3 DECIMAL PLACES ±0.1
3nl ANGLE --6--,......,-
PROJECTION ~ ';:::;J ~
ISS/RE.V AIIEIIliiENIS
ECO DRN OICD AliTH AFVD DAlE
"tqco
MX1
-
I<JS JG RC DP 6-6-13
48-C CONTINUITY BASE
Fire Protection Products
WIRING DIAGRAM
TYCO FIRE PROTECTION PRODUCTS
17 MARY MULLER DRIVE
DRAWING No:
1982-71
SHEET 105of
N
P.O. BOX 19545
CHRISTCHURCH, PH: +64 3 3895096
A3 I ISS/REV
A I PART No:
NEW ZEALAND. FAX:+64 3 3895938