3 - 4
▶
AUTO THROTTLE AND HAZARD LAMP
Auto Throttle S/W
Hazard Warning
Signal S/W
■ AUTO THROTTLE SWITCH
To activate the auto throttle function, Press the button into the ON
position.
Then, the yellow indicator on the button And the symbol on the in-
strument cluster Come on.
Depressing the HST pedal in this State accelerates the vehicle to a
certain speed level.
To deactivate the function, press the button again.
Then, the lamp goes off and the function is deactivated.
■ Load sensing function disabled during automatic throttle
function operation
■ HAZARD LAMP SWITCH
Push the hazard warning signal once to operate the hazard warning
light. (Left and right turn indicators ash).
Push the hazard warning light switch again to switch off the hazard
warning lights.
To Next Page
Loading...
