TYM T454HST - Page 49

3 - 13
SECTION A
3
► CRUISE SPEED CONTROL
SWITCH
Cruise speed can be increased or decreased
while cruise control is engaged.
Press and release top of cruise speed control
switch(+) to increase cruise speed by incre-
ment ratio. Press and release again to increase
cruise speed more by increment ratio.
CRUISE SPEED CONTROL SWITCH
Press and release bottom of cruise speed con-
trol switch(-) to increase by increment ratio.
Press and release again to decrease cruise
speed more by increment. ratio
Adjusted setting is erased when cruise control
is disengaged.
►LOAD SENSING BUTTON
Load sensing function is used to prevent en-
LOAD SENSING BUTTON
gine from stalling during heavy load applica-
tion. Press load sensing button to activate load
sensing function.
If the engine speed drops more than the set
range, the controller reduce HST speed to
help the engine to recover. The heavier load
on the engine, the tractor speed is more and
more reduced.
Press again the switch off the load sensing
function.