MAINTENANCE RULES
▶ENGINE
Servicing the engine
To gain access to the engine, the hood must be released initially by pulling the hook release lever which is
locate
left on the side at the
otto
: This done, lift up the front en
of the hoo
an
osition the stay ro
.
Important: When opening the hood in windy conditions, put the front of the tractor towards the wind.
With the hood up, the hook release lever and front panel can be
removed by pulling forward, having first detached the headlamp
wiring harness.
The side panels are removed by lifting the front end and
pulling outwards, then withdrawing from the anchorages at
the rear end.
Use only approved non-inflammable, non-toxic solvents for cleaning parts. Never
Caution
use pe
ro
, so
ven
s or o
er
n
amma
e
u
s.
Replace all covers or guards removed after servicing or cleaning the machine.
NEVER operate the machine with the covers or guards removed.
30
To Next Page
Loading...
