TYM T700 - Page 44

When changing from forward to reverse or back to forward again while in high
range make sure the tractor comes to a stop before changing direction. Failure to
do so is likely to result in damage to the mechanism and place the driver at risk of
injury.important
Operate the shuttle shift only while seated on the tractor.
Do not use the shuttle shift lever to start the tractor for towing or traveling uphill,
use the clutch instead.
Always stop the tractor before getting off.
Caution
▶Main shift lever
Thi l b hift d b i th l t h b th
Thi
s
l
ever can
b
e s
hift
e
d
b
y us
i
ng
th
e c
l
u
t
c
h
,
b
o
th
when the tractor is stationary or mobile.
It is located on the RHS of the driver seat.
▶ Sub shift lever(Linear shift lever)
Operate the sub shift lever using the clutch to select the
appropriate speed range for different applications.
It is located on the LHS of driver seat.
Do not operate the gear lever without using the clutch.
Do not operate the sub shift lever without stopping the tractor and without
using the clutch.
important
▶ Diff-lock pedal
In case of wheel slippage use the diff-lock by pushing
down on the diff lock pedal.
To release it remove the foot from the pedal.
40
Tractor will be difficult to turn if the Diff-
lock is engaged, ensure the lock is
disengaged before turning the steering
wheel.
Danger