TYM T700 - Page 93

1,2) Working lamp Switch
The front and rear work lights are ON when
push the button .The work light indicator lamp
on the instrument cluster will illuminate.
3) Temperature control
3)
Temperature
control
Set temperature control as required,fully clockwise
For maximum cool and fully counterclockwise for heat
4) Blower control switch
Three position rocker switch
5) Air conditioning switch
T t th i diti th bl t b Th bl d t t t l d ll
T
o opera
t
e
th
e a
i
r con
diti
oner,
th
e
bl
ower mus
t
b
e on.
Th
e
bl
ower spee
d
t
empera
t
ure con
t
ro
l
an
d
a
ll
vents must be adjusted to obtain the best cooling for the ambient temperature and dust conditions.
Under normal operating conditions,and the windows and doors closed,temperatures in the cab of 6ºC
to 15 ºC (10 ºF to 25 ºF) less than the ambient temperature will occur.When operating the air
conditioner system,the moisture level is decreased.
NOTE:
1) During cold weather,with ambient temperature above 0 ºC (32 ºF) operate the air conditioner at
least once per month,for a period of 10 to 15 minutes.This will lubricate the seals to prevent them
becoming brittle and help prevent the loss of refrigerant from the system.
2) The system is equipped with an environmentally safe refrigerant,R134a.Never recharge the air
conditioning system with refrigerant other than R134a as this will result in loss of cooling and
permanent damage to all air conditioning components
6,7) wiper control switch(Front and Rear)
ON SWITCH:
-Wind screen wiper operation
-Continuous pushing button operates wiper and Washer pump.
OFF SWITCH:
-wind screen wiper off and operates washer pump
89