DSTOPTRS 22 2008
NOTE: A thorough periodic inspection of the blower and blower housing should be
performed by a qualified mechanic at maximum intervals of 500 operating
hours. This inspection requires removal of the blower assembly.
A. Blower - Wear on the blower is normal; however, the blower should be
replaced when wear begins cutting through the blower paddles.
B. Blower Housing Liner and Blower Lip - A rubber bolt-in wear liner is
used to protect the metal scroll in the blower housing. The liner should
be inspected every 500 hours of sweeper operation. The blower liner
must be replaced whenever a rubber lined blower is used to replace a
plain aluminum blower. The blower lip should be inspected along with
the blower housing liner and replaced or repaired if worn.
To Next Page
Loading...