EasyManua.ls Logo

TypeS BLIZZARD BOX Series - Troubleshooting; Power and Fuse Issues; Error Light Code Interpretation

TypeS BLIZZARD BOX Series
16 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
TROUBLESHOOTING:
Issue Cause Remedy
Power indicator
light is not on
or Blizzard Box
does not work.
No power input. Check whether input power is functional or
not. The engine must be on in most vehicles
to provide the power.
Blizzard Box fuse burnt. Change fuse.
Vehicle-mounted fuse
burnt.
Refer to vehicle operating manual to change
fuse.
Car plug socket does
not connect well.
Clean the socket and check whether plug
connects correctly.
1 Flash
(Error light)
Low Voltage. Please check the source voltage to ensure it
is above the voltage cut out setting.
2-4 Flashes
(Error light)
Compressor locked or
operation speed is too
low.
Unplug for 10 minutes.
5 Flashes
(Error light)
Ambient temperature is
too high.
Ensure side ventilation vents have good air
ow, and are not blocked.
The Error codes are depicted by a number of ashes by the Error light in a
sequence every fours seconds. If Error indicator light blinks, the compressor
will restart every 60 seconds until it starts successfully.
ML-57245_V1
Have a comment or question? Email us at: info@typesauto.com
or visit us online at www.typesauto.com
A Horizon Brands Company
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626
1.866.294.9244 | info@typesauto.com
©2019 Type S. All rights reserved.
www.typesauto.com