5
2. Operating panel
After connecting power to your Blizzard Box, the Power Light
Indicator on the Operating Panel will be Orange. The Digital
Display will be blank.
Press and hold the On / Off Button for three seconds. The Digital
Display will then show the current interior temperature. Once the
Power Light turns Green, your Blizzard Box is operating.
Temp. / Setting DownDigital DisplaySetting Button
Temp. / Setting Up
On / Off Button
Power / Status Light
Orange: Stand-by
Green: Running
Error Light
Red (Flashing): Low voltage or damage,
contact Customer Care.
OPERATION CONT.:
3. Turning on Blizzard Box
4. Setting the temperature
- Press button once, start setting temperature status.
- Use / to set temperature from 0°F to 50°F or
-18°C to 10°C.
- The cooling temperature will be displayed for a few seconds.
The Digital Display will ash several times before the interior
temperature is displayed.
- Press button once again, start exchange status for
Fahrenheit degree (°F) and centigrade degree (°C).