TypeS BT57132 User Manual

11
4. The camera should be paired
within 30 seconds. If the pairing
is successful, the display will
show “Pair OK”.
5. If no camera is found, then the
display will show “Pair Fail”. In
this case, cut o power and
reboot the Dash Monitor. If you
keep receiving the “Pair Fail”
message after several attempts,
please call our technical support
to assist in troubleshooting.
ROTATE CAMERA
Tap on the setting to reverse the
camera view.
BRIGHTNESS
Swipe to adjust screen brightness

TypeS BT57132 Specifications

General

Brand	TypeS
Model	BT57132
Category	Automobile Electronics
Language	English