Screen Save
Date & Time
Digital Clock
Plate Number
Speed Unit
WiFi Setting
Language
Format
Default Setting
Device Info
Regulatory Info
System Setting
16
Plate Number
• When you have entered your license plate number and set this to ON, your plate number will show on
all recorded media les alongside the date and TYPE S logo stamp.
Speed Unit
• Select the unit of speed between KM/H and MPH. Default speed unit is set as MPH.
WiFi Setting
• The auto sync function enables you to view and manage les on your smart device using the TYPE S
Drive App.
NOTE: Refer to page 21 for pairing procedure.
System Setting
Screen Save
• Select the time of inactivity between O, 1 minute, 3 minutes
and 5 minutes. Screen will dim to a digital clock interface
after the specied time of inactivity you select. To turn on the
display, click any of the function buttons.
Date & Time
• Update the date & time shown on the Dashcam and on all its
recorded media les.
Digital Clock
• Digital Clock (during screen save mode) On/O. The digital
clock and date will be shown on the screensaver when you set
this as ON. Otherwise, the screen will be turned o.
To Next Page
Loading...
