TypeS TravCa Dash 360 - Modes & LED Indicators

60
Caution: Park & Record Mode and low voltage power
cut-o function will be disabled if the hardwire connection
is done without the use of the DC 12V hardwire cable that
comes with the package.
6. MODES & LED INDICATORS
Power / Mode Status LED Indicators
Power On
TravCa Dash 360 powers ON
when the engine is turned on.
Alternatively, press and hold the
power button for more than 3
seconds to power on the TravCa
Dash 360.
Red LED light stays on when
TravCa Dash 360 is powering on.
Power O
TravCa Dash 360 powers OFF
when the engine is turned o.
Alternatively, press and hold the
power button for more than 3
seconds to power OFF the TravCa
Dash 360.
Red LED light ashes 1 time
when the TravCa Dash 360 is
powering o.
Normal Mode Red LED light ashes.
Park & Record Mode Blue LED light ashes.
Live Stream Red LED light stays on during a
live stream section.
Firmware Upgrade Red and blue LED lights ash
together.
Default Setting Red and blue LED lights ash
together.