Need help?Do you have a question about the typical GC0323 and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Formation | Lock Stitch |
| Needle System | DBx1 |
| Lubrication | Automatic |
| Thread Trimmer | No |
| Reverse Feed | Yes |
| Bed Type | Flat Bed |
| Brand | Typical |
| Model | GC0323 |
| Material | Metal |
| Hook Type | Rotary |
Procedures for setting the correct needle up and down positions using the machine's pulley marks.
Safety and operational guidelines for the machine's control box, motor, and electrical connections.
Methods for adjusting needle and upper thread tension using tension nuts and springs for optimal stitches.
How to adjust the pressure applied by the presser foot to the fabric for different materials.
Procedures for setting the correct height and obliquity (timing) of the feed dog mechanism.
Steps for adjusting the alternating movement, balance, and feed amount of the presser feet.
How to set the correct timing relationship between the feed cams for proper feed dog operation.
Detailed instructions for adjusting the thread trimming device, including knife clearance and solenoid stroke.
Diagram and parts list for the automatic thread trimming system and its actuators.
To Next Page
