Need help?Do you have a question about the typical GC6180 and is the answer not in the manual?
General| Stitch Formation | Lock Stitch |
|---|---|
| Stitch Length | 5 mm |
| Stitch Width | 7 mm |
| Built-in Free Arm | Yes |
| Speed Control | Yes |
| LED Light | Yes |
| Automatic Needle Threader | Yes |
| Drop Feed | Yes |
| Type | Electronic |
| Operation | Computerized |
| Application | Home use |
Details on how to fill the oil reservoir correctly and maintain the oil level.
Instructions for adjusting the oil amount for the rotating hook mechanism.
Step-by-step instructions for correctly installing the needle.
Procedure to adjust the opening time of the tension discs for optimal sewing.
Detailed steps for threading the needle and bobbin for sewing.
Guide to installing and adjusting the bobbin winder for proper thread winding.
How to adjust the presser foot pressure based on material thickness.
Instructions for adjusting needle and bobbin thread tension for correct stitches.
Procedure to synchronize the needle and rotating hook for accurate stitching.
How to adjust stitch length and utilize reverse feeding.
Steps for adjusting the position of the feed dog and needle for proper feeding.
Explanation of the thread cutting mechanism and its components.
To Next Page
