Need help?Do you have a question about the typical GC20606L18-D2T and is the answer not in the manual?
General| Brand | typical |
|---|---|
| Model | GC20606L18-D2T |
| Category | Sewing Machine |
| Language | English |
Position the machine correctly, install oil reservoir, and mount the machine head onto the table.
Install thread spool stand, motor, and knee control lifter, then adjust their settings for optimal function.
Remove protective grease, inspect for damage after transit, and prepare the machine for operation.
Fill the oil reservoir to the correct level, use specified oil, and follow regular oil replacement schedules.
Connect power lead and illuminating line to the control box, ensuring correct wiring and safety precautions.
Set motor running direction and adjust the needle's stop position to 'UP' as required.
Coordinate needle, thread, and material; install needle properly and wind bobbin thread.
Thread the machine following the numerical sequence and adjust stitch length for forward/reverse sewing.
Install bobbin correctly into the case and thread the bobbin thread through the specified path.
Adjust needle and bobbin thread tension to achieve normal stitch formation and prevent thread issues.
Adjust presser foot pressure, understand safety clutch function, and learn how to reset it.
Adjust upper feed, presser foot lift, hook oil amount, and movable knife settings for optimal performance.
Adjust trimming cam, thread releasing assembly, and knife pressure for correct mechanism operation.
Adjust needle gauge and trimming pressure for sharp and precise thread cutting.
To Next Page
