DHCP Client Mode
If the printer is set to DHCP Client mode, the DHCP server
will assigned an IP address to the printer when connecting
to the local network.
Perform the self-test and the printer will print out the test
data; then the printer will stand by to receive the IP address
from the DHCP server.
As the IP address is assigned to the printer and
configuration is completed, the printer will print out the
assign IP address.
Note:
The printer will be set to the default IP address
(192.168.123.100) when there is not any IP address
assigned to the printer (DHCP timeout is 90 seconds).
To Next Page
