Tysso PRP-300 - LPT and UTP (USB to Parallel) Interface Installation (Customized Models Reserved)

- 52 -
6. LPT and UTP (USB to Parallel) Interface
installation (customized models
reserved)
Before Installation:
Please consult the local supplier and purchase the
customized models support LPT or UTP (USB to Parallel)
interface.
WARNING:
This instruction is ONLY for customized models with LPT or
UTP (USB to Parallel) interface.
DO NOT install the driver to any models not support the LPT
or UTP interface. It may cause the printer not functioning