To Next PageTo Next PageWhat to do if I can't talk to or hear other users in my TYT Two-Way Radio group?
If you can't communicate with your group, ensure you're using the same frequency and CTCSS tone as everyone else. Also, consider the distance; other users might be too far away, so make sure you are within the communication range.
What to do if the voice of non-group users appears on the channel of my TYT TC3000 VHF?
If you're hearing voices from users outside your group on your channel, change your CTCSS tone. Remember to update the tone on all radios within your group to ensure everyone stays on the same channel.
Why doesn't my TYT TC3000 VHF power on?
If your radio isn't powering on, the battery may be depleted. Try replacing or recharging it. Alternatively, the battery might not be properly connected. Remove it and reattach it to ensure a secure connection.
Why doesn’t power last long even if fully charged on my TYT Two-Way Radio?
If your fully charged radio's power doesn't last long, the battery life cycle may be over. Replace it with a new one.
General| Frequency Range | 136-174 MHz |
|---|---|
| Modulation | 16KΦF3E/11KΦF3E |
| Antenna Impedance | 50 Ω |
| Operating Temperature | -30°C to +60°C |
| IP Rating | IP54 |
| Power Output | 25W/10W/5W |
| Battery Type | Li-ion |
| Number of Channels | 16 |
| Battery | Li-ion battery |
Details on compliance with national and international RF energy exposure standards and operational limits.
Procedures for safe and efficient radio operation, including transmission and body-worn use.
Details on radio compliance with FCC rules and necessary licensing for operation.
Steps for selecting channels and transmitting audio, including microphone distance.
Details on making selective calls, group calls, and activating the emergency siren.
Common issues, their causes, and recommended solutions for radio problems.
