TYT TH-9000D Plus User Manual

Thank you very much for using two-way radios.
This product has a newly developed function menu
and humanism operation design, making it easy to use.
It will meet your requirement by the compact size and
reasonable price.
To customers
User Manual
TYT Electronics Co., Ltd.
TH-9000D P ro,TH-9000D P lus

TYT TH-9000D Plus Specifications

General

Modulation Type	FM
Operating Voltage	13.8V DC ±15%
Antenna Impedance	50Ω
Frequency Stability	±2.5 ppm
Frequency Range	136-174 MHz (VHF)
Weight	1.2 kg
Channel Spacing	25kHz/20kHz/12.5kHz
Squelch	CTCSS, DCS
Operating Temperature	-20°C to +60°C
Current Consumption	≤0.5A
Channel Capacity	200 channels

Summary

Precautions

New and Innovative Features

Supplied Accessories/Optional Accessories

Supplied Accessories

Lists and illustrates items included with the transceiver.

Optional Accessories

Lists and illustrates optional accessories available for purchase.

Initial Installation

Mobile installation

Guide on safely and conveniently installing the transceiver in a vehicle.

DC Power Cable Connection

Instructions for connecting the transceiver to a 12V DC power source.

Antenna Connection

Guidance on connecting the antenna for optimal transceiver performance.

Accessories Connections

Details on connecting external speakers and microphones to the unit.

Fixed Station Operation

Power Supply Voltage Display

How to display and interpret the transceiver's power supply voltage.

PC Connecting

Getting Acquainted

Front panel

Overview of the transceiver's front panel controls and their functions.

Rear panel

Description of the connectors and ports on the rear of the transceiver.

Display

Explanation of the icons and information shown on the transceiver's display.

Microphone

Details on connecting and using the microphone with the transceiver.

Display Mode

Basic Operations

Switching The Power On/Off

Instructions on how to turn the transceiver on and off.

Adjusting The Volume

How to increase or decrease the audio volume level.

Channel Mode

How to switch to and use the channel mode for operation.

Adjusting Channel Through Selector Knob

Method for changing channels using the selector knob.

Receiving

How the transceiver indicates an incoming call and signal strength.

Transmitting

Steps for transmitting audio using the microphone and PTT key.

Transmitting Tone-Pulse

Procedure for transmitting a selected tone-pulse signal.

Transmitting Optional Signaling

How to send pre-stored DTMF, 2-Tone, or 5-Tone signals.

Channel Edit

Process for editing and storing channel information.

Channel Delete

Steps to delete a stored channel from memory.

Shortcut Operations

Provides quick access to commonly used functions.

Squelch Off

How to disable the squelch to monitor weak signals.

Squelch level Setup

Adjusting the squelch level for optimal signal reception.

Frequency/Channel Scan

How to scan for active frequencies or channels.

CTCSS/DCS Encode and Decode Setup

Configuring CTCSS/DCS tones for selective communication.

CTCSS Scan

Scanning for CTCSS signals to identify active communication.

DCS Scan

Scanning for DCS codes to identify active communication.

Voice Compander

Enhancing audio clarity by reducing background noise.

Offset Direction and offset frequency setup

Setting frequency offsets for repeater communications.

Keypad Lockout

Current Voltage Enquiry

Auto-Dialer Setup

Transmitting Edited DTMF tones in the Auto-dialer memory

Sending pre-programmed DTMF tones for remote control or auto-patch.

General Setting

Frequency Channel Step Setup

Setting the frequency increment step for VFO mode.

DTMF, DTMF ANI, 2Tone or 5Tone Signaling

Configuring signaling methods for enhanced communication features.

Sending 2-Tone Call

Procedure for sending a 2-Tone call to another transceiver.

Sending 5-Tone Call

Procedure for sending a 5-Tone call to another transceiver.

Sending DTMF call

Procedure for sending a DTMF call to another transceiver.

Signaling Combination setup

Setting combinations of signaling for improved reception protection.

Band-width Selection

Choosing between wide (25K) and narrow (12.5K) bandwidths.

TX OFF SETUP

Disabling transmission to keep the channel in RX mode only.

Busy Channel Lockout

Preventing transmission on a busy channel to avoid interference.

Editing Channel NAME

Assigning names to channels for easier identification.

Reverse TX/RX

Swapping transmit and receive frequencies and signaling.

Talk Around

Direct communication without using a repeater.

8 Groups of Scrambler (Encryption)

Enabling voice inversion for confidential communication.

Radio's DTMF SELF ID ENQUIRY

Checking the transceiver's programmed DTMF Self ID.

Radio's 5TONE SELF ID ENQUIRY

Checking the transceiver's programmed 5TONE Self ID.

Voice Prompt

Enabling or disabling audible prompts for operations and status.

TOT (Time-out timer)

Setting a limit on continuous transmission time to prevent overheating.

APO (Auto power off)

Setting the transceiver to automatically switch off after a specified time.

DTMF Transmitting Time

Adjusting the time interval for sending DTMF signals.

Squelch level Setup

Fine-tuning the squelch level for optimal reception.

Scan Stop Time Setup

Configuring the dwell time for scan operations.

LCD Backlight

Adjusting the brightness of the LCD screen.

Background Light Color

Selecting the color for the LCD backlight.

Pilot Frequency

Setting a pilot frequency to activate repeaters.

Display Mode Setup

Configuring display modes for frequency and channel information.

Power On Password Setup

Address list

Factory Default

Microphone Operation

Function Setup By Microphone Keypad

Customizing functions assigned to microphone keypad buttons.

Switches between VFO and channel mode

Changing between VFO and channel modes using the microphone.

Short Calling

Transmitting DTMF/2TONE/5TONE signals for short calls.

Squelch Level

Adjusting the squelch level using the microphone.

Optional signaling

Setting up optional signaling methods like DTMF, 2TONE, or 5TONE.

Scan Skip

Frequency/Channel scan

Busy Channel Lockout

Reverse TX/RX

CTCSS/DCS Encode and Decode

Talk Around

Long-distance Anti-theft Alarm

Cable Clone

Programming Software Installing and Starting (in windows XP system)

Maintenance

Default Setting after Resetting(UHF)

Default settings after performing a UHF reset.

Trouble Shooting

Specifications

General

General technical specifications of the transceiver.

Receiver (ETSI EN 300 086 standard testing)

Receiver performance specifications according to ETSI EN 300 086.

Transmitter (ETSI EN 300 086 standard testing)

Transmitter performance specifications according to ETSI EN 300 086.

Attached Chart

50 groups CTCSS Tone Frequency(Hz)

Table of 50 CTCSS tone frequencies.

1024 groups DCS Code.

Table of 1024 DCS codes.