EasyManuals Logo

TYT TH-9000D Plus User Manual

TYT TH-9000D Plus
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
38
8 Groups of Scrambler (Encryption)
An analog voice inversion scrambler can be equipped as optionals.This special audio process
can offer a more confidential communication.Other radios at same frequency will receive
only disordered noises.
1. Press and hold key for over 2s to enter general setting menu.
2. Press / key to choose No.15 menu, LCD displays "SCR--OF".
3. Turn selector knob to select the desired group,
8 groups in total and you can set your desired
value as well.
4. Press key to confirm and exit. Default: OFF
Radio's DTMF SELF ID ENQUIRY
1. Press and hold key for over 2s to enter general setting menu.
2. Press / key to choose No.16 menu, LCD displays
"D--XXX" XXX is radio's DTMF SELF ID.
3. Press key to confirm and exit.
Radio's 5TONE SELF ID ENQUIRY
1. Press and hold key for over 2s to enter general setting menu.
2. Press / key to choose No.17 menu, LCD displays
"F--XXXXX","XXXXX" is radio's 5TONE SELF ID.
3. Press key to confirm and exit.
P1 P2
P5
P1 P2
P5
P1 P2
P5
39
Voice Prompt
The prompting tone provides confirmation of entry, error status or malfunctions of the
transceiver. You can enable or disable this function.
1. Press and hold key for over 2s to enter general setting
menu.
2. Press / key to choose No.18 menu, LCD displays
"BEEP--ON".
3. Turn selector knob to select the desired setting.
ON:Enable voice prompt
OFF:Disable voice prompt
4. Press key to confirm and exit.Default:ON.
NOTE: Suggestion:Enable this function to check incorrect operation and malfunctions.
TOT (Time-out timer)
The time-out timer limits the amount of transmitting time. When you reach the time limit
which has been programmed by your dealer, your transmission will be cut off. In order to
transmit again, you must release PTT button to reset the timer.
1. Press and hold key for over 2s to enter general setting
menu.
2. Press / key to choose No.19 menu, LCD displays"TOT--3"
3. Turn selector knob to select the desired setting.
Timer:1-30min,each level 1min
P1 P2
P5
P1
P2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TYT TH-9000D Plus and is the answer not in the manual?

TYT TH-9000D Plus Specifications

General IconGeneral
Modulation TypeFM
Operating Voltage13.8V DC ±15%
Antenna Impedance50Ω
Frequency Stability±2.5 ppm
Frequency Range136-174 MHz (VHF)
Weight1.2 kg
Channel Spacing25kHz/20kHz/12.5kHz
SquelchCTCSS, DCS
Operating Temperature-20°C to +60°C
Current Consumption≤0.5A
Channel Capacity200 channels

Related product manuals