TYTAN DS512 CAN GPS GSM
CAN-bus Vehicle Security System (VSS) and GSM-SMS Pager features
• GSM-SMS pager integrated with CAN-bus Vehicle Security System central unit,
• alarming state signalisation with SMS messages in GSM network,
• external GPS receiver (optional),
• remote (SMS) control of VSS and remote access to VSS trigger source memory,
• valet mode (service mode),
• operation mode as GSM-SMS Pager monitoring of OEM security system via CAN bus,
• operation mode as GSM-SMS Pager monitoring of any analogue security system already
installed in the vehicle,
• operation mode as standalone Vehicle Security System with CAN-bus connection
to vehicle electronic systems is armed/disarmed with OEM remotes or SMS commands,
• VSS: signalisation if door / trunk / bonnet is open during arming (door ajar),
• VSS: signalisation if the alarm was triggered during disarming,
• VSS: CAN-bus control of hazard lights, central door locking, power windows on some
vehicle models,
• VSS: additional sensors input
- vehicle interior protection with ultrasonic motion detector (optional),
- vehicle towing and wheel theft protection with additional tilt sensor (optional),
• VSS: arming without additional sensors,
• VSS: state of the system is stored in non-volatile memory and is saved during power-off,
To Next Page
Loading...
