4. Position the unit to allow free air flow through the front grille
(Figure 4).
Figure 4
LEVELING THE UNIT
It is important that the unit is level. All Échelon™ Series units are
equipped with adjustable feet for leveling and height adjustment
(Figure 5).
To level the unit:
1. Adjust all four leveling feet evenly so that the top of the cabinet is at
the desired installation height.
2. Using a level of at least two feet in length, measure the level of the
floor where the unit is to be installed. Measure back-to-front and
side-to-side and note the measurements.
3. With the unit on a level surface, adjust no more than three of the
feet, as appropriate, to compensate for the floor level measure-
ments noted in Step 2.
To Next Page
Loading...
