3. Wrench 11. Buckle 1 2. Buckle 2
6. Workbench
4. Wrench 2
7. Cushion
XII. Installing Amplitude
5. Amplitude
1. Screw amplitude manually.
2. Place energy converter on the bench covered by soft materials (e.g.
towels).
3. Put wrench1 on buckle2 and wrench2 on buckle2.
4. Facing the horn with wrench1 in the left hand and wrench2 in the
right hand, tighten by turning downwards with two hands at the
same time.
For questions or concerns, e-mail service@ussolid.com, visit www.ussolid.com,
or call (800) 243-5428
To Next Page
Loading...