Need help?Do you have a question about the U-tec UltraloqUL3 and is the answer not in the manual?
General| Lock Type | Deadbolt |
|---|---|
| Connectivity | Bluetooth |
| Material | Zinc Alloy |
| Auto Lock | Yes |
| Access Methods | Fingerprint, Keypad, Key |
| Battery Life | 12 months |
| Weather Resistance | Yes |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Power Source | Battery |
Watch a step-by-step video for lock operation before attempting to use the Ultraloq Smart Lock.
Register your Ultraloq lock online to ensure the best warranty coverage and customer service.
Details on specific warranty terms, limitations, and how to contact U-tec Customer Service.
Access technical documents and support via website, phone, or email for assistance.
Identification and description of the lock's external parts, including the touchscreen and fingerprint reader.
Identification and description of the lock's internal parts, such as the SN label and battery cover.
Instructions for cleaning the fingerprint reader and touchscreen with a microfiber cloth.
Steps to activate the lock by touching it with a hand or finger.
Procedures for unlocking the door from the outside using a PIN code or fingerprint.
Simple method to open the door from the interior using the handle.
Guidance on when and how to replace the lock's batteries.
How to use the physical key for unlocking in case of battery failure or unknown codes.
Explanation of the Vague Code feature, allowing partial entry of the correct code.
Best practices for placing a finger on the sensor for accurate recognition.
Description of the default state where any fingerprint or PIN opens the door.
Process for creating admin accounts and adding/deleting user accounts.
Guidelines for setting up user PIN codes (4-8 digits) and User IDs (1-8 digits).
Information on the maximum number of users (95) that can be registered.
General procedure to enter the programming menu and select functions.
Instructions for performing a factory reset using the reset button.
Detailed steps to add a new administrator account to the lock system.
Detailed steps to add a new user account with their fingerprint or PIN.
Detailed steps to remove an existing user account from the lock.
Steps to add a second or subsequent administrator account.
Detailed steps to remove an administrator account from the lock.
A template and example for logging user details like name, ID, and codes.
Official statement regarding compliance with FCC Part 15 rules and potential interference.
To Next Page
