QUESTIONS? Call 800-518-8925 or Email support@trackmyme.com
CHARACTER TABLES
To join a WiFi network (BN6500 and BN6600 models only), you will use the numeric
keypad to enter numbers, leers, and symbols for your password. The following tables
display the keys you will use to enter each leer or symbol.
12
Switching To Numbers
To enter numbers press the ESC key once. To return to leers, press the check mark key unl
the bar at the boom of the screen says “English.”
Entering Symbols
To enter symbols press the check mark key unl it says “symbol” and enter the appropriate
numerical and key paerns for the symbol desired.
Saving the Password
Once you have added your WiFi password, ensure that you are in number entry mode, then press
OK to enter.
NOTE: To access the number entry mode, press the ESC key once from the leer or symbol
entry mode.
Your WiFi password will display at the top of the screen and you will be asked to press OK again
to conrm that it is correct. If not, go back.
Press the ESC key unl you are back to the main screen. Your screen will display “System Ready”
in green once your password has authencated.