AV-30-E Service Bulletin Software Upgrade 1.1.0 18
UAV-1005261-001 Rev A
9 System Update
After the AV-Link and AV-30 have been installed, a firmware update will be
required to enable the AV-Link features of the AV-30. Download the latest
firmware and save it on the PC.
1. Power on the AV-30 and AV-
Link. Make sure that Power will
not be lost during update.
2. Connect a PC to the AV-Link
Wi-Fi Network. This will be
displayed as AV-#### where
#### will be 4 random
characters ranging from 0-8
and A-F.
To Next Page
Loading...
