uAvionix echoUAT - Connecting to the echoUAT via Wi-Fi

20
UAV-1001006-001
ECCN 7A994
8. Installation Setup
Download the “uAvionix Echo Installer” app from the iOS App store or
Google Play. Note: Do not use the “uAvionix Ping Installer” app by
mistake.
8.1.1 Connecting to the echoUAT via Wi-Fi
To connect to the echoUAT, join a device to the wireless network named
“Ping-XXXX” using the procedure for your device. iOS is shown below:
1. Go to Settings > Wi-Fi, and make sure that Wi-Fi is turned on.
2. Tap the SSID Ping-XXXX where XXXX is a random string. i.e. Ping-
6A8E.
3. No WPA Password is required.*
*Some early software builds require a WPA password… Enter uavionix as
the WPA password for the secure Wi-Fi network, then tap join. Note: The
No Internet Connection message is normal when iOS is connected to
echoUAT.