Ubee U10CO35 Cable Modem User Guide, v10_30_10
Ubee Interactive 12
3 Web-Based Device Management Utility
Use this chapter to access and use the U10CO35 web management utility.
3.1 PC Requirements
Be certain that your PC adheres to the following requirements. Refer to page 7 for more information on system
requirements:
Supports TCP/IP, Supports DHCP, Web browser installed
3.2 Connect the Device
Use the following procedure to connect the U10CO35 cable modem.
1. Connect the power adapter that is included with the product package to the U10CO35 and to the
power outlet.
2. Connect one end of a network cable to your computer’s Ethernet port. Connect the other end to the
100BaseT port on the U10CO35.
3. Turn on your computer.
To Next Page
Loading...
