Ubee U10C035 User Manual

Ubee U10CO35 Cable Modem User Guide, v10_30_10
Ubee Interactive 18
Modulation
Displays the current locked upstream modulation type
(QPSK/ 8QAM /16QAM/
32QAM/64QAM/128QAM/256QAM).
Symbol Rate (Ksym/sec)
Displays the current locked upstream symbol rate.
Mini-Slot Size
Displays the current locked upstream mini-slot.
Power Level (dBmV)
Displays the current locked upstream transmit power.
T1 Timeouts
Displays the number of timeouts waiting for a valid UCD
from the CMTS.
T2 Timeouts
Displays the number of timeouts waiting for a maintenance
broadcast from the CMTS.
T3 Timeouts
Displays the number of timeouts waiting for ranging request
from the CMTS during initial maintenance.
T4 Timeouts
Displays the number of timeouts waiting for periodic
maintenance request from the CMTS for unicast ranging
opportunity.
Refresh
Click to re-display the current state of information in this
screen.
3.8 Upstream Burst
Use the following procedure to review detailed information regarding the cable modem’s upstream burst
attributes.
1. Access the web interface. Refer to page 13 for instructions if required.
2. Click Upstream Burst from the left-side of the screen.
3. Instructions are provided below the following example.
Note: Other Upstream channels are not shown in this guide, but may appear in the web interface.
Item
Description
Modulation Type
Displays the current modulation type
(QPSK/16QAM/8QAM/32QAM/64QAM/128QAM) used for

Ubee U10C035 Specifications

General

Brand	Ubee
Model	U10C035
Category	Modem
Language	English