Ubee U10C035 User Manual

Ubee U10CO35 Cable Modem User Guide, v10_30_10
Ubee Interactive 4
2 Introduction
Welcome to the Ubee family of data networking products. This document provides instructions on how to
connect and use the Ubee U10C035 Cable Modem. The U10C035 Cable Modem provides high-speed access
to the Internet using an active Internet connection provided by your cable service provider.
2.1 General Features
The cable modem includes the following features:
• Two-way design allows the cable modem to send and receive data over the cable television network.
• Data Over Cable Service Interface Specification (DOCSIS™) 3.0 certification ensures interoperability
with DOCSIS compliant cable operators.
• Cable bandwidth allows up to 4 bonded downstream channels and 4 bonded upstream channels,
allowing data rates of up to 152 megabits per second (Mbps)* downstream and up to 108 Mbps*
upstream, which is faster than traditional DOCSIS 2.0 cable modems, integrated services digital
network (ISDN), or asymmetric digital subscriber line (ADSL).
• Using the cable line means that the cable modem is always on, always connected, and does not tie up
your phone lines.
*Note: The following causes may affect the connection speed.
• Computer specification, including available RAM space and processor speed.
• Software applications that may be using computer’s resources.
• Network traffic depending on the time of day.
• Max data rate set by your Cable Service Provider based on your service tier.
2.2 Device Specifications
Interface
• RF Interface: External F-Connector
• CPE Interface: 10/100/1000 Base Ethernet RJ45
Downstream
• Frequency Range: 88 MHz ~ 1002 MHz
• Modulation: 64 / 256 QAM
• Maximum Data Rate 4DS: 171 Mbps (152 Mbps)
• RF Input/Output Power: -15 to +15 dBmV
• Input Impedance: 75 Ω
• Channel Bandwidth: 6 MHz

Ubee U10C035 Specifications

General

Brand	Ubee
Model	U10C035
Category	Modem
Language	English