Uberhaus 87795023 - Operating Instructions

AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel, remote controller
and all functions, then follow the symbol for the functions you desire.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
OPERATION PANEL OF THE AIR CONDITIONER
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
AUTO, COOL , DRY , HEAT
and FAN.The
mode indicator
light illuminates under the
different mo
de
setting.
NOTE: The control FDQGLVSOD\WHPSHUDWXUHLQ
degrees Fahrenheit or degrees&HOVLXV7R
convert from one to the other, pressDQGKROG
the Up and Down buttons at the sameWLPH
for 3 seconds.
Used to initiate the AUTO ON start time
and AUTO OFF stop time program, in
conjuction with the & buttons.
1
UP( ) and DOWN( ) button
Used to adjust (increasing/decreasing)
temperature settings (1 C/1 F increments)
in a range of 17 C (62 F) to 30 C (86 F) or
the TIMER setting in a range of 0~24hrs.
Use this button to initiate the auto
swing feature or lock the louver at
the desired positon.
2
SWING button
3
MODE select button
4
Power switch on/off.
POWER button
5
FAN button
TIMER button
6
7
Used to initiate the SLEEP operation.
SLEEP button
8
O
-Shows the set temperature in C or
O
F and the Auto-timer settings.
While on DRY and FAN modes, it shows
the room temperature.
Press to select the fan speed in four steps-
LOW , MED (on some models), HIGH
and AUTO.
The fan speed indicator light
illuminates under different fan settings
except AUTO speed. When AUTO
fan speed is selected, all the fan indicator lights
Fig.4
3
7
4
5
6
1 1
8
2
10
9
MODE
AUTO
5
The unit can be controlled by the unit control panel alone or with the remote controller.
(on some models only)
tum dark.
LED Display